Specifications

2-439
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
show running-config-application
show running-config-application
To display the contents of the currently running configuration application in the Cisco SCE platform, use
the show running-config-application command in the privileged EXEC mode.
show running-config-application
Syntax Description This command has no arguments or keywords.
Command Default None.
Command Modes Privileged EXEC
Command History This table includes the following release-specific history entries:
Usage Guidelines The authorization used is root.
Examples The followingis sample output from the show running-config-application command:
SCE>enable 15
Password:<cisco>
SCE#>show running-config-application
#This is an application configuration file (running-config-application).
#Created on 16:19:28 UTC FRI November 18 2011
#cli-type 1
#version 1
interface LineCard 0
application /apps/data/scos/temp.sli
exit
# Dynamic RDR category configuration
#This is a party templates configuration(included in application configuration
running-config-application).
#Created on 16:19:28 UTC FRI November 18 2011
#cli-type 1
#version 1
logger application-stats import-application-stats
/apps/data/scos/system/p3hidden/um//config//appstats.csv
RDR-formatter protocol NetflowV9 mapping file
/apps/data/scos/system/p3hidden/um//config//netflow.xml
SCE#>
Release Modification
3.7.x This command was introduced.