Specifications

2-409
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
show management-agent
show management-agent
Displays information regarding the management agent.
show management-agent
Syntax Description This command has no arguments or keywords.
Command Default This command has no default settings.
Command Modes User EXEC
Command History This table includes the following release-specific history entries:
Usage Guidelines Use this command to display the following information for the management agent:
• status (enabled or disabled)
• access control list number assigned
Authorization: viewer
Examples The following example shows how to display the information for the management-agent.
SCE>enable 5
Password:<cisco>
SCE>show management-agent 
management agent is enabled.
management agent is active, version: SCE Agent 3.0.3 Build 15
management agent does not use any access-list.
SCE>
Related Commands
Release Modification
2.5.7 This command was introduced.
Command Description
management-agent
access-class
Assigns an access class list (ACL) to the management agent, so that access
to the management agent is limited to the IP addresses defined in the ACL.
service
management-agent