Specifications

2-379
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
show interface linecard TpReportCounters
show interface linecard TpReportCounters
To display the following reports, use the show interface linecard TpReportCounters command in the
user EXEC mode:
• Total Number of Reports generated
• Number of Reports successfully sent to the Control Processor(CP)
• Number of Reports dropped at the corresponding Traffic Processor(TP)
show interface linecard slot-number TpReportCounters
Syntax Description
Command Default None.
Command Modes User EXEC
Command History This table includes the following release-specific history entries:
Usage Guidelines The authorization used is admin.
Examples The following is the sample output from the show interface linecard TpReportCounters command:
SCE>enable 15
Password:<cisco>
SCE>show interface linecard 0 TpReportCounters
--- PPC 0 -----------------------------------------------------------
Total Reports Formed: 0
Reports sent to Control: 0
Reports dropped to Control: 0
--- PPC 1 -----------------------------------------------------------
Total Reports Formed: 424486
Reports sent to Control: 355311
Reports dropped to Control: 69175
--- PPC 2 -----------------------------------------------------------
Total Reports Formed: 477317
Reports sent to Control: 355208
Reports dropped to Control: 122109
--- PPC 3 -----------------------------------------------------------
Total Reports Formed: 371456
Reports sent to Control: 355230
Reports dropped to Control: 16226
--- PPC 4 -----------------------------------------------------------
Total Reports Formed: 424412
slot-number Number of the identified slot. Enter a value of 0.
Release Modification
3.7.x This command was introduced.