Specifications

2-374
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
show interface linecard subscriber mapping included-in tp-ip-range
show interface linecard subscriber mapping included-in
tp-ip-range
Displays the existing subscriber mappings for a specified TIR or IP range.
show interface linecard slot-number subscriber [amount] mapping included-in tp-ip-range
[TP-IP-range-name | IP]
Syntax Description
Command Default This command has no default settings.
Command Modes User EXEC
Command History This table includes the following release-specific history entries:
Usage Guidelines Use the amount keyword to display the number of existing mappings only, rather than the mappings
themselves.
Authorization: viewer
Examples The following examples illustrate how to use this command:
EXAMPLE 1:
Following is an example of how to display all existing mappings for TIR CMTS1.
SCE>enable 5
Password:<cisco>
SCE>show interface linecard 0 subscriber mapping included-in tp-ip-range CMTS1 
SCE>
EXAMPLE 2:
Following is an example of how to display the number of existing mappings for TIR CMTS1.
SCE>enable 5
Password:<cisco>
SCE>show interface linecard 0 subscriber amount mapping included-in tp-ip-range CMTS1

SCE>
slot-number The number of the identified slot. Enter a value of 0.
TP-IP-range-name Name of the TIR for which mappings should be displayed.
IP IP range for which mappings should be displayed.
Release Modification
2.5.7 This command was introduced.