Specifications

Table Of Contents
2-369
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
show interface linecard subscriber sm-connection-failure
show interface linecard subscriber sm-connection-failure
Displays the current state of the SM-SCE platform connection, as well as the configured action to take
in case of failure of that connection.
show interface linecard slot-number subscriber sm-connection-failure [timeout]
Syntax Description
Command Default This command has no default settings.
Command Modes User EXEC
Command History This table includes the following release-specific history entries:
Usage Guidelines Use the timeout keyword to display the configured SM-SCE platform link failure timeout value.
Authorization: viewer
Examples The following examples illustrate the use of this command:
EXAMPLE 1
The following is an example of how to display the state of the SM-SCE platform connection.
SCE>enable 5
Password:<cisco>
SCE>show interface linecard 0 subscriber subscriber sm-connection-failure
Current SM link state: down.
Please note that this refers to the logical connection,
which means the synchronization with the SM i.e.
There might be cases where the connection at the SM will be up
and down at the SE since synchronization hasn't been completed yet.
Configured action to take when SM link is down: No action
SCE>
EXAMPLE 2
The following is an example of how to display the configured timeout value for the SM-SCE platform
connection.
SCE>enable 5
Password:<cisco>
SCE>show interface linecard 0 subscriber subscriber sm-connection-failure timeout
SM SCE link failure timeout is: 90
SCE>
slot-number The number of the identified slot. Enter a value of 0.
Release Modification
3.0.3 This command was introduced.