Specifications

2-365
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
show interface linecard subscriber name bucket-state
show interface linecard subscriber name bucket-state
Displays all buckets used by the specified subscriber.
show interface linecard slot-number subscriber name name bucket-state
Syntax Description
Command Default None.
Command Modes User EXEC
Command History This table includes the following release-specific history entries:
Usage Guidelines Authorization: viewer
Examples The following example shows output from this command:
SCE>enable 5
Password:<cisco>
SCE>show
interface linecard 0 subscriber name john_doe bucket-state
Bucket 1 is used. Status - Not Breached.
Bucket 2 is used. Status - Breached.
Bucket 3 is used. Status - Breached.
Bucket 4 is used. Status - Breached.
Bucket 5 is used. Status - Breached.
Bucket 6 is used. Status - Not Breached.
Bucket 7 is used. Status - Not Breached.
Bucket 8 is used. Status - Not Breached.
Bucket 9 is used. Status - Not Breached.
Bucket 10 is used. Status - Not Breached.
Bucket 11 is used. Status - Not Breached.
Bucket 12 is used. Status - Not Breached.
Bucket 13 is used. Status - Not Breached.
Bucket 14 is used. Status - Not Breached.
Bucket 15 is used. Status - Not Breached.
Bucket 16 is used. Status - Not Breached.
SCE>
slot-number Number of the identified slot. Enter a value of 0.
name Name of the subscriber for which to display the breach-state
Release Modification
3.6.x This command was introduced.