Specifications

2-344
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
show interface linecard periodic-records aggregation
show interface linecard periodic-records aggregation
To displays the current RDR aggregation configuration, use the show interface linecard
periodic-records aggregation command in user EXEC mode.
show interface linecard slot-number periodic-records aggregation
Syntax Description
Command Modes User EXEC (>)
Command History This table includes the following release-specific history entries:
Usage Guidelines Authorization: viewer
Examples The following is a sample output from the show interface linecard 0 periodic-records aggregation
command:
SCE> enable 5
Password: <cisco>
SCE> show interface linecard 0 periodic-records aggregation
VLUR : enabled
LUR : enabled
PUR : enabled
SCE>
Table 2-6 describes the significant fields shown in the display.
Related Commands
slot-number Number of the identified slot.
Release Modification
3.7.x This command was introduced.
Table 2-6 Field descriptions for the show interface linecard periodic-records aggregation
command
Field Description
VLUR Shows the RDR aggregation status for the Virtual Link Usage RDRs.
LUR Shows the RDR aggregation status for the Link Usage RDRs.
PUR Shows the RDR aggregation status for the Periodic Usage RDRs.
Command Description
periodic-records aggregate-by-cpu Enables RDR aggregation for the specified RDRs.