Specifications

CHAPTER
2-1
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
2
CLI Command Reference
Revised: February 20, 2014, OL-26797-03
Introduction
This chapter contains all the user and admin level CLI commands available on the SCE 2000 and SCE
1000 platforms.
Each command description is broken down into the following sub-sections:
Syntax and Conventions
The CLI commands are written in the following format:
command required-parameter [optional-parameter]
no is an optional parameter that may appear before the command name.
When typing commands, you may enclose parameters in double-quote marks, and you must do so when
there is a space within a parameter name.
Description Description of what the command does.
Command Syntax The general format of the command.
Syntax Description Description of parameters and options for the command.
Default If relevant, the default setting for the command.
Mode The mode (command line) from which the command can be
invoked.
Usage guidelines Information about when to invoke the command and additional
details.
Authorization The level of user authorization required for using the command.
Example An illustration of how the command looks when invoked. Because
the interface is straightforward, some of the examples are obvious,
but they are included for clarity.
Related Commands Other commands that might be used in conjunction with the
command.