Specifications

2-327
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
show interface linecard counters
show interface linecard counters
Displays the Linecard Interface hardware counters.
show interface linecard slot-number counters [bandwidth] [cpu-utilization]
show interface linecard slot-number counters VAS-traffic-bandwidth
Syntax Description
Command Default This command has no default settings.
Command Modes User EXEC
Command History This table includes the following release-specific history entries:
Usage Guidelines Specify any of the optional keywords to display only the desired counters.
The VAS-traffic-bandwidth option is supported by the SCE 2000 platform only.
Authorization: viewer
Examples The following example shows the hardware counters for the Linecard Interface.
SCE>enable 5
Password:<cisco>
SCE>show interface linecard 0 counters
DP packets in: 340
DP packets out: 340
DP IP packets in: 340
DP Non-IP packets: 0
DP IP packets checksum err: 0
DP IP packets length err: 0
DP IP broadcast packets: 0
DP IP fragmented packets: 0
DP IP packets with TTL=0 err: 0
DP Non TCP/UDP packets: 0
DP TCP/UDP packets checksum err: 0
DP ARP packets: 0
DP PPP compressed packets: 0
DP packets dropped: 0
DP tuples to FF: 340
DP tuples from CLS: 340
DP L7 Filter congested packets: 0
DP VLAN packets: 0
DP MPLS packets: 0
slot-number The number of the identified slot. Enter a value of 0.
Release Modification
2.5.7 This command was introduced.