Specifications

2-325
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
show interface linecard connection-mode
show interface linecard connection-mode
Shows the current configuration of the SCE platform traffic link connection.
show interface linecard slot-number connection-mode
Syntax Description
Command Default This command has no default settings.
Command Modes User EXEC
Command History This table includes the following release-specific history entries:
Usage Guidelines Authorization: viewer
Examples
Example 1
The following example shows typical output of this command for a single SCE 2000 platform.
SCE>enable 5
Password:<cisco>
SCE>show interface linecard 0 connection-mode
slot 0 connection mode
Connection mode is inline
slot failure mode is bypass
Redundancy status is active
SCE>
Example 2
The following example shows typical output of this command for a cascaded SCE 2000 platform.
SCE>enable 5
Password:<cisco>
SCE>show interface linecard 0 connection-mode
slot 0 connection mode
Connection mode is inline-cascade
slot 0 sce-id is 1
slot 0 is secondary
slot 0 is connected to peer
slot failure mode is bypass
Redundancy status is standalone
SCE>
slot-number The number of the identified slot. Enter a value of 0.
Release Modification
2.5.7 This command was introduced.