Specifications

2-322
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
show interface linecard cascade peer-sce-information
show interface linecard cascade peer-sce-information
Displays information about the peer SCE platform. The data is available even when the two platforms
are no longer in cascade connection mode.
show interface linecard slot-number cascade peer-sce-information
Syntax Description
Command Default This command has no default settings.
Command Modes User EXEC
Command History This table includes the following release-specific history entries:
Usage Guidelines Authorization: viewer
Examples
Example 1
The following example shows typical output of this command when the two SCE platforms are
connected correctly.
SCE>enable 5
Password:<cisco>
SCE>show interface linecard 0
cascade peer-sce-information
Peer SCE's IP address is 10.10.10.10
SCE>
Example 2
The following example shows typical output of this command when the two SCE platforms are not
connected correctly.
SCE>enable 5
Password:<cisco>
SCE>show interface linecard 0
cascade peer-sce-information
SCE is improperly connected to peer.
For further information, please consult cli show "cascade connection-status" command
Last known peer SCE's IP address was 10.10.10.10
slot-number The number of the identified slot. Enter a value of 0.
Release Modification
3.6.x This command was introduced.