Specifications

2-319
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
show interface linecard attack-filter
• subscriber-notification ports : displays the list of subscriber-notification ports
• subscriber-notification redirect: displays the configuration of subscriber-notification redirection,
such as the configured destination and dismissal URLs, and allowed hosts.
Authorization: viewer
Examples The following examples illustrate the use of this command.
EXAMPLE 1:
The following example displays the configuration of attack detection between two specified IP addresses
(dual-sided) for destination port 101.
SCE>enable 5
Password:<cisco>
SCE>show interface linecard 0 attack-filter
query dual-sided source-IP 10.10.10.10 dest 10.10.10.145 dest-port 101 configured

SCE>
EXAMPLE 2:
The following example displays all existing forced attack filters.
SCE>enable 5
Password:<cisco>
SCE>show interface linecard 0 attack-filter 
force-filter No force-filter commands are set for slot 0

SCE>
EXAMPLE 3:
The following example displays the subscriber notification ports.
SCE>enable 5
Password:<cisco>
SCE>show interface linecard 0 attack-filter
subscriber-notification ports

Configured Subscriber notification ports: 100
SCE>
Related Commands Command Description
attack-filter Enables specific attack detection for a specified protocol and attack
direction.
attack-filter
force-filter | dont-filter
Prevents attack filtering for a specified IP address/protocol.