Specifications

2-318
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
show interface linecard attack-filter
show interface linecard attack-filter
Displays the attack filtering configuration.
show interface linecard slot-number attack-filter [option ]
Syntax Description
Command Default This command has no default settings.
Command Modes User EXEC
Command History This table includes the following release-specific history entries:
Usage Guidelines Following is a list of options that may be displayed:
• query IP configured : displays the configured threshold values and action as follows:
– query single-sided IP ip-address configured : displays the configured threshold values and
action for attack detection for a specified IP address (single-sided detection)
– query dual-sided source-IP ip-address1 dest ip-address2 configured : displays the configured
threshold values and action for attack detection between two specified IP addresses (dual-sided
detection)
– dest-port port#: displays the configured threshold values and action for the specified port. You
can include this argument with both single-sided and dual-sided queries.
• query IP current : displays the current counters for a specified attack detector for all protocols and
attack directions as follows:
– query single-sided IP ip-address current : displays the current counters for attack detection
for a specified IP address (single-sided detection)
– query dual-sided source-IP ip-address1 dest ip-address2 current : displays the current
counters for attack detection between two specified IP addresses (dual-sided detection)
– dest-port port #: displays the configured threshold values and action for the specified port. You
can include this argument with both single-sided and dual-sided queries.
• current-attacks : displays all currently handled attacks
• counters : displays all attack detection counters
• dont-filter : displays all existing stopped attack filters
• force-filter : displays all existing forced attack filters
slot-number The number of the identified slot. Enter a value of 0.
option See Usage Guidelines for the list of options.
Release Modification
2.5.7 This command was introduced.