Specifications

1-17
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 1 Command-Line Interface
Creating a CLI Script
Creating a CLI Script
The CLI scripts feature allows you to record several CLI commands together as a script and play it back.
This is useful for saving repeatable sequence of commands, such as software upgrade. For example, if
you are configuring a group of SCE platforms and you want to run the same configuration commands on
each platform, you could create a script on one platform and run it on all the other SCE platforms. The
available script commands are:
• script capture
• script stop
• script print
• script run
Step 1 At the sce# prompt, type script capture sample1.scr where sample1.scr is the name of the script.
Step 2 Perform the actions you want to be included in the script.
Step 3 Type script stop.
The system saves the script.
The following is an example of recording a script for upgrading software.
SCE#script capture upgrade.scr
sce#configure 
SCE(config)#boot system new.pkg
Verifying package file...
Package file verified OK.
SCE(config)#exit 
sce#copy running-config startup-config
Writing general configuration file to temporary location...
Extracting files from ‘/tffs0/images/new.pkg’...
Verifying package file...
Package file verified OK.
Device ‘/tffs0/’ has 81154048 bytes free, 21447973 bytes are needed for extraction, all is
well.
Extracting files to temp locations...
Renaming temp files...
Extracted OK.
Backing-up general configuration file...
Copy temporary file to final location...
sce#script stop 
sce#