Specifications

2-313
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
show interface linecard asymmetric-routing-topology
show interface linecard asymmetric-routing-topology
Displays information relating to asymmetric routing topology.
show interface linecard slot-number asymmetric-routing-topology
Syntax Description
Command Default This command has no default settings.
Command Modes User EXEC
Command History This table includes the following release-specific history entries:
Usage Guidelines Displays the following:
• Current asymmetric routing topology status
• The ratio of TCP unidirectional flows to total TCP flows per traffic processor (TCP unidirectional
flows ratio ).
The unidirectional flows ratio is displayed only for TCP flows, and reflects the way the flows were
opened. It is calculated over the period of time since the SCE platform was last reloaded, or since
the counters were last reset.
To reset the asymmetric routing mode counters, see clear interface linecard
asymmetric-routing-topology counters.
Note The SCE platform identifies unidirectional flows by default and regardless of the asymmetric routing
mode.
Authorization: viewer
Examples The following example illustrates how to use this command:
SCE>enable 5
Password:<cisco>
SCE>show interface linecard 0 asymmetric-routing-topology 
Asymmetric Routing Topology mode is disabled
TCP Unidirectional flows ratio statistics:
==========================================
Traffic Processor 1 : 2%
Traffic Processor 2 : 7%
slot-number The number of the identified slot. Enter a value of 0.
Release Modification
3.1.0 This command was introduced.