Specifications

2-308
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
show interface gigabitethernet
show interface gigabitethernet
Displays the details of a GigabitEthernet Interface.
show interface gigabitethernet slot-number/interface-number [counters [direction ]|queue
queue-number ]
Syntax Description
Command Default This command has no default settings.
Command Modes User Exec
Command History This table includes the following release-specific history entries:
Usage Guidelines Enter a value of 1 - 2 for the interface-number parameter for line ports 1 - 2 to show information on the
line interfaces for the SCE 1000 2xGBE platform.
Enter a value of 1 - 4 for the interface-number parameter for line ports 1 - 4 to show information on the
line interfaces for the SCE 2000 4xGBE platform.
The counters keyword displays the values of counters of a GigabitEthernet line interface.
The queue keyword displays the bandwidth and burst size of a queue in a GigabitEthernet line interface.
Authorization: viewer
Examples The following example shows the GigabitEthernet details.
SCE>enable 5
Password:<cisco>
SCE>show interface gigabitethernet 0/1

SCE>
Related Commands
slot-number The number of the identified slot. Enter a value of 0.
interface-number GigabitEthernet interface number 1 - 2, or 1 - 4.
direction Optional direction specification, to show only counters of a specific
direction. Use in or out.
queue-number Number of queue, in the range 0-3
Release Modification
2.5.7 This command was introduced.
Command Description
interface
gigabitethernet
Enters GigabitEthernet Interface Configuration mode to configure a
specified Gigabit Ethernet line interface.