Specifications

2-296
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
setup
setup
Invokes the setup utility, which is a dialog, or series of questions, that guides the user through the basic
configuration process. This utility runs automatically upon initial connection to the local terminal. The
utility may also be invoked explicitly to make changes to the system configuration.
setup
Syntax Description The setup command does not include parameters in the usual sense of the word. However, the setup
utility questions prompt for many global configuration parameters. Following is a table listing all the
parameter values that are necessary to complete the initial configuration. It is recommended that you
obtain all these values before beginning the setup.
Parameter Description
IP address IP address of the SCE platform.
subnet mask Subnet mask of the SCE platform.
default gateway Default gateway.
hostname Character string used to identify the SCE platform.
Maximum length is 20 characters.
admin password Admin level password.
Character string from 4-100 characters beginning with an alpha character.
root password Root level password.
Character string from 4-100 characters beginning with an alpha character.
password encryption
status
Enable or disable password encryption?
Time Settings
time zone name and
offset
Standard time zone abbreviation and minutes offset from UTC.
local time and date Current local time and date.
Use the format: 00:00:00 1 January 2007
SNTP Configuration
broadcast client status Set the status of the SNTP broadcast client.
If enabled, the SCE will synchronize its local time with updates received
from SNTP broadcast servers.
unicast query interval Interval in seconds between unicast requests for update (64 – 1024).
unicast server IP
address
IP address of the SNTP unicast server.
DNS Configuration
DNS lookup status Enable or disable IP DNS-based hostname translation.
default domain name Default domain name to be used for completing unqualified host names.
IP address IP address of domain name server. (maximum of 3 servers)