Specifications

2-281
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
scmp subscriber send-session-start
scmp subscriber send-session-start
Configures the SCMP to make the SCMP peer device push sessions to the SCE platform immediately
when the session is created on the peer device. Use the no form of the command to disable pushing of
sessions from the SCMP peer device to the SCE platform.
scmp subscriber send-session-start
no scmp subscriber send-session-start
Syntax Description This command has no arguments or keywords.
Command Default Default is disabled.
Command Modes Global
Command History This table includes the following release-specific history entries:
Usage Guidelines This command takes effect only if it is set before the connection with the SCMP peers is established.
Use the no scmp and scmp commands to stop and then restart the SCMP if active connections exist.
This feature must be disabled in MGSCP deployments.
Authorization: admin
Examples The following example illustrates how to use this command.
SCE>enable 10
Password:<cisco>
SCE#config
SCE(config)#scmp subscriber send-session-start 
SCE(config)#
Related Commands
Release Modification
3.0.3 This command was introduced.
Command Description
show scmp Displays the SCMP (ISG) general configuration and status.