Specifications

2-278
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
scmp subscriber force-single-sce
scmp subscriber force-single-sce
Configures the SCMP to make the SCMP peer device verify that each subscriber is only provisioned for
one SCE platform. This configuration must be enabled in MGSCP deployments. Use the no form of the
command to disable verifying each subscriber is only provisioned for one SCE platform.
scmp subscriber force-single-sce
no scmp subscriber force-single-sce
Syntax Description This command has no arguments or keywords.
Command Default Default is disabled.
Command Modes Global configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines This command takes effect only if it is set before the connection with the SCMP peers is established.
Use the no scmp and scmp commands to stop and then restart the SCMP if active connections exist.
Authorization: admin
Examples The following example illustrates how to use this command.
SCE>enable 10
Password:<cisco>
SCE#config
SCE(config)#scmp subscriber force-single-sce 
SCE(config)#
Related Commands
Release Modification
3.0.3 This command was introduced.
Command Description
show scmp Displays the SCMP (ISG) general configuration and status.
scmp Enables the Service Control Management Protocol functionality.