Specifications

2-277
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
scmp reconnect-interval
scmp reconnect-interval
Defines the SCMP reconnect interval; that is the amount of time between attempts by the SCE platform
to reconnect with an SCMP peer.
scmp reconnect-interval interval
Syntax Description
Command Default interval = 30 seconds
Command Modes Global configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines The SCE platform attempts to reconnect to the SCMP peer device at the defined intervals by sending an
establish peering request message. If a valid reply is received, the SCMP connection state for the SCMP
peer is changed, and the SCMP performs the required reconnection operations, such as the following:
• Re-querying the peer regarding all subscribers provisioned by this device
• Querying the peer regarding all anonymous subscribers created using the anonymous group assigned
to this peer
Authorization: admin
Examples The following example illustrates how to define the SCMP reconnect interval.
SCE>enable 10
Password:<cisco>
SCE#configure
SCE(config)#scmp reconnect-interval 60

SCE(config)#>
Related Commands
interval Interval between attempts by the SCE platform to reconnect with an SCMP
peer, in seconds
Release Modification
3.0.3 This command was introduced.
Command Description
show scmp Displays the SCMP (ISG) general configuration and status.
scmp
loss-of-sync-timeout
Defines the loss of sync timeout interval; that is the amount of time between
loss of connection between the SCE platform and an SCMP peer device and
the loss-of-sync event.