Specifications

2-273
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
scmp keepalive-interval
scmp keepalive-interval
Defines interval between keep-alive messages to the SCMP peer device.
scmp keepalive-interval interval
Syntax Description
Command Default interval = 5 seconds
Command Modes Global configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines The SCE platform sends keep-alive messages to all connected SCMP peer device at the defined interval.
• If a response is received within the defined interval, the keep-alive time-stamp is updated.
• If a response is not received within the defined interval, the connection is assumed to be down; the
connection state is changed to not-connected, and the SCMP begins attempts to reconnect.
Authorization: admin
Examples The following example illustrates how to define the SCMP keepalive message interval.
SCE>enable 10
Password:<cisco>
SCE#configure
SCE(config)#scmp keepalive-interval 10

SCE(config)#
Related Commands
interval Interval between keep-alive messages from the SCE platform to the SCMP
peer device.
Release Modification
3.0.3 This command was introduced.
Command Description
show scmp Displays the SCMP (ISG) general configuration and status.