Specifications

2-258
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
reload shutdown
reload shutdown
Shuts down the SCE platform, preparing it for being turned off.
reload shutdown
Syntax Description This command has no arguments or keywords.
Command Default This command has no default settings.
Command Modes Privileged EXEC
Command History This table includes the following release-specific history entries:
Usage Guidelines Use this command to shut down the SCE platform in an orderly manner, before turning it off. After
issuing this command, the only way to revive the SCE platform from its power-down state is to turn it
off, then back on.
This command can only be issued from the serial CLI console port. When issued during a telnet CLI
session, an error message is returned and the command is ignored. This is done to prevent the possibility
of shutting it down from a remote location, from which it is not possible to power back up.
Authorization: admin
Examples The following example shows the shutdown process.
SCE>enable 10
Password:<cisco>
SCE#reload shutdown 
You are about to shut down the system.
The only way to resume system operation after this
is to cycle the power off, and then back on.
Continue? Y 
IT IS NOW SAFE TO TURN THE POWER OFF.
Related Commands
Release Modification
2.5.7 This command was introduced.
Command Description
reload Reboots the SCE platform.