Specifications

2-248
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
rdr-formatter destination protocol NetflowV9 template data timeout
rdr-formatter destination protocol NetflowV9 template data
timeout
Configures the interval after which all Netflow templates must be exported to the specified destination
(refreshed). Use the no or the default form of the command to disable the template refresh mechanism.
rdr-formatter destination ip-address port port-number protocol NetflowV9 template data
timeout timeout-value
no rdr-formatter destination ip-address port port-number protocol NetflowV9 template data
default rdr-formatter destination ip-address port port-number protocol NetflowV9 template
data
Syntax Description
Command Default By default, the refresh mechanism is disabled.
Command Modes Global configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines A template record defines the structure of each Netflow data record. The RDR formatter transmits the
templates only along with their matching data records. The RDR formatter refreshes the templates on
the collector by resending them at configured intervals.
The no form of the command disables the refresh mechanism.
The default form of the command also disables the refresh mechanism, since the default state is
disabled.
Authorization: admin
Examples The following example illustrates the use of this command:
SCE>enable 10
Password:<cisco>
SCE#config
ip-address The destination IP address.
port-number The destination port number.
timeout-value The time interval, in seconds,.between exporting the Netflow templates to
the specified destination. Valid range is 1 – 86400 seconds.
Release Modification
3.1.0 This command was introduced.