Specifications

2-241
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
rdr-formatter category number buffer-size
rdr-formatter category number buffer-size
Sets the buffer size for the specified RDR category.
rdr-formatter category number category-number buffer-size size
default rdr-formatter category number category-number buffer-size
default rdr-formatter buffer-size all
Syntax Description
Command Default Default buffer size varies by category and SCE platform type (see Usage Guidelines ).
Command Modes Global configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines This command can be executed only when the RDR-formatter service is disabled (Use the no service
RDR-formatter command ).
Use the default option to set the buffer size for the specified category to the default value.
Use the all keyword with the default option to set the buffer size for the all categories to the default
value.
Total memory assigned to all RDR categories is:
• SE1000: 20MB
• SE2000: 40MB
The total memory available for the RDR formatter cannot be changed. This command specifies how
much of the total available memory is allocated to each RDR category.
By default, the buffer sizes are as follows:
• SCE 2000:
– Category 1—20 MB
– Category 2—12 MB
– Category 3—4 MB
– Category 4—4 MB
• SCE 1000:
category-number Number of the RDR category (1-4)
size Size of the buffer allocated to the specified category in bytes
Release Modification
3.5.5 This command was introduced.