Specifications

2-228
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
party name
party name
To enable the task of creating a static party in the Cisco SCE platform, use the party name command in
the global configuration mode. To delete the static party that is created, use the no form of this
command.
party name party-name
no party name party-name
Command Default None.
Command Modes Global configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines The authorization used is root.
Examples The following example shows how to create a static party:
SCE>enable 15
Password:<cisco>
SCE#config
SCE(config)#>party name [party-name]
SCE(config)#
Related Commands
party-name Name of the static party that is to be created.
Release Modification
3.7.x This command was introduced.
Command Description
party mapping
ip-address ip-address
name party-name
Sets the IP address for a specified static party in the Cisco SCE platform.
party mapping
ip-range
ip-range/mask-value
name party-name
Sets the IP range for a specified static party in the Cisco SCE platform.
show party name
party-name
Displays the contents of ae specified static party in the Cisco SCE platform.