Specifications

2-227
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
party mapping ip-range
party mapping ip-range
To set the IP range for a specified static party in the Cisco SCE platform, use the party mapping ip-range
command in the global configuration mode.
party mapping ip-range ip-address/mask-value name party-name
Note If the mask value is not provided for the corresponding IP address, the complete mask value of 32 will
be taken into consideration for the specified IP address.
Syntax Description
Command Default None.
Command Modes Global configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines The authorization used is root.
Examples The following example shows how to set the IP range for the specified static party:
SCE>enable 15
Password:<cisco>
SCE#config
SCE(config)#>party mapping ip-range 1.2.3.0/31 name [party-name]
SCE(config)#exit
Related Commands
ip-address IP address of the static party which is created.
mask-value Mask value that is to be set for the specified IP address.
party-name Name of the configured static party.
Release Modification
3.7.x This command was introduced.
Command Description
party mapping
ip-address ip-address
name party-name
Sets the IP address for a specified static party in the SCE platform.
party name party-name Allows the creation of a specified static party in the SCE platform.
show party name
party-name
Displays the contents of a specified static party in the SCE platform.