Specifications

Table Of Contents
2-226
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
party mapping ip-address name
party mapping ip-address name
To set the IP address for a specified static party in the Cisco SCE platform, use the party mapping
ip-address name command in the Global configuration mode.
party mapping ip-address ip-address name party-name
Syntax Description
Command Default None.
Command Modes Global configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines The authorization used is root.
Examples The following example shows how to set the IP address for the specified static party:
SCE>enable 15
Password:<cisco>
SCE#config
SCE(config)#>party mapping ip-address 24.11.52.128 name [party-name]
SCE(config)#exit
Related Commands
ip-address IP address of the static party that is created.
party-name Name of the configured static party.
Release Modification
3.7.x This command was introduced.
Command Description
show party name
party-name
Display the contents of the specified static party in the SCE platform.
party name party-name Allows the creation of a specified static party in the SCE platform.
party mapping
ip-range
ip-address/mask-value
name party-name
Sets the IP range for the specified static party in the SCE platform.