Specifications

2-225
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
no subscriber mappings included-in
no subscriber mappings included-in
Use this command to remove all existing subscriber mappings from a specified TIR or IP range.
no subscriber mappings included-in tp-ip-range name TP-IP-range-name
no subscriber mappings included-in ip-range IP-range
Syntax Description
Command Default This command has no default settings.
Command Modes Linecard Interface Configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines Use the TP-IP-range name parameter to remove all existing subscriber mappings from a specified TIR.
Use the IP-range parameter to remove all existing subscriber mappings from a specified IP range.
Authorization: admin
Examples The following example removes any existing subscriber mappings from the CTMS1 TIR.
SCE>enable 10
Password:<cisco>
SCE#config
SCE(config)#interface linecard 0
SCE(config if)# no subscriber mappings included-in TP-IP-range name CMTS1
Related Commands
TP-IP-range-name Meaningful name assigned to this traffic processor IP range
IP-range IP address and mask length defining the IP range
Release Modification
2.5.7 This command was introduced.
Command Description
show interface
linecard subscriber
mapping included-in
tp-ip-range
Displays the existing subscriber mappings for a specified TIR or IP range.