Specifications

1-8
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 1 Command-Line Interface
Authorization and Command Levels (Hierarchy)
Table 1-5 summarizes how to navigate the CLI command hierarchy.
Table 1-5 CLI Command Hierarchy
Authorization Level or
Command Mode Use this command to access
Use this command to
exit
User Exec Not applicable logout or exit (exits the
current CLI session)
Viewer enable 5 disable
Privileged Exec enable 10 or enable 15 (accesses root level) disable
Global Configuration configure exit (exits to Privileged
Exec)
end (exits to User Exec)
Management Interface
Configuration
(management)
interface Mng 0/1 or 0/2 exit (exits to Global
Configuration)
end (exits to User Exec)
Linecard Interface
Configuration
interface linecard 0 exit (exits to Global
Configuration)
end (exits to User Exec)
GigabitEthernet Interface
Configuration (traffic)
SCE 2000: interface gigabitethernet 0/1, 0/2,
0/3, or 0/4
SCE 1000: interface gigabitethernet 0/1 or
0/2
OR
SCE 2000: interface range gigabitethernet
0/<port-range (any range between 1 and 4)
SCE 1000: interface range gigabitethernet
0/1-2
exit (exits to Global
Configuration)
end (exits to User Exec)
Line Configuration line vty 0 exit (exits to Global
Configuration)
end (exits to User Exec)