Specifications

2-223
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
no subscriber
no subscriber
Removes a specified subscriber from the system. Use the all option to remove all introduced subscribers.
no subscriber name subscriber-name
no subscriber scmp name scmp-name all
no subscriber sm all
no subscriber all [with-vpn-mappings]
Syntax Description
Command Default This command has no default settings.
Command Modes Linecard Interface Configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines This command may affect the party db performance, because this command triggers sequential
processes that affects the flows and may result in removing the party context. We recommend that you
do not run this command in an active network which cotains large number of subscribers.
Note Use the with-vpn-mappings option ONLY when the SCE platform is disconnected from the SM.
Authorization: admin
Examples The following example removes all subscribers.
SCE>enable 10
Password:<cisco>
SCE#config
subscriber-name Specific subscriber name to be removed from the system.
scmp name all Removes all subscribers managed by the specified SCMP peer device.
scmp-name Name of an SCMP peer device.
sm all Removes all subscribers managed by the SM.
all Removes all introduced subscribers.
with-vpn-mappings Removes all VPN-based subscribers. This option allows you to switch out
of VPN mode when the SM is down
Release Modification
2.5.7 This command was introduced.