Specifications

2-222
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
no mpls vpn pe-database
no mpls vpn pe-database
Removes all configured PE router entries.
no mpls vpn pe-database
Syntax Description This command has no arguments or keywords.
Command Default This command has no default settings.
Command Modes Linecard Interface Configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines All MPLS VPNs must be logged out before using this command, since it removes all PE routers.
Authorization: admin
Examples The following example illustrates the use of this command.
SCE>enable 10
Password:<cisco>
SCE#config
SCE(config)#interface linecard 0
SCE(config if)#no mpls vpn pe-database 
SCE(config if)#
Related Commands
Release Modification
3.0.3 This command was introduced.
Command Description
show interface
linecard mpls
Displays the current MPLS tunnelling configuration.
mpls vpn pe-id Defines a PE router, with the interface IP address of that PE router.