Specifications

2-209
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
more startup-config-all
more startup-config-all
To display the contents of all the startup configuration files, use the more startup-config-all command
in the privileged EXEC mode.
more startup-config-all
Note The configuration file contents will be displayed only if all the startup configuration files are copied
from the running configuration.
Syntax Description This command has no arguments or keywords.
Command Default None.
Command Modes Privileged EXEC
Command History This table includes the following release-specific history entries:
Usage Guidelines The authorization used is root.
Examples The following is sample output from the more startup-config-all command:
SCE>enable 15
Password:<cisco>
SCE#more startup-config-all
#This is a general configuration file (running-config).
#Created on 16:19:09 UTC FRI November 18 2011
#cli-type 1
#version 1
watchdog software-reset disabled
watchdog hardware-reset disabled
hostname "pqemb154SAV"
ip ssh
no management-agent notifications notification-list
1417,1418,804,815,1404,1405,1406,1407,1408,400
no management-agent notifications notification-list
402,421,440,441,444,445,446,450,437,457
no management-agent notifications notification-list 3593,3594,3595,10040
RDR-formatter destination 10.78.242.172 port 33000 category number 1 priority 100
RDR-formatter destination 10.78.242.172 port 33000 category number 2 priority 100
RDR-formatter destination 10.78.242.172 port 33000 category number 3 priority 100
RDR-formatter destination 10.78.242.172 port 33000 category number 4 priority 100
interface LineCard 0
Release Modification
3.7.x This command was introduced.