Specifications

1-5
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 1 Command-Line Interface
Authorization and Command Levels (Hierarchy)
Figure 1-1 illustrates the hierarchical structure of the CLI modes, and the CLI commands used to enter
and exit a mode.
Figure 1-1 CLI Command Modes
The following commands are used to enter the different configure interface modes and the Line
Configuration Mode:
• E1 interface Linecard 0
• E2 interface Mng 0/1 or 0/2 (management port, all platforms)
• E3:
– SCE 1000: interface GigabitEthernet 0/1 or 0/2
– SCE 2000: interface TenGigabitEthernet 0/1, 0/2, 0/3, or 0/4
• E4:
– SCE 1000: interface range GigabitEthernet 0/1-2
– SCE 2000: interface range TenGigabitEthernet 0/<port-range (any range between 1 and
4)>
• E5 line vty 0
ExitE5ExitExitE1 ExitE2 ExitE3 E4
Interface
Range
Configuration
Mode
Line
Configuration
Mode
Interface
Configuration
Mode
(Traffic)
Management
Interface
Configuration
Mode
Interface Configuration Mode
Line Card
Interface
Configuration
Mode
Privileged Exec Mode
Global Configuration Mode
ExitConfigure
User Exec Mode
DisableEnable
210640