Specifications

2-179
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
logging facility
logging facility
Assigns the syslog messages to the specified facility.
To reset the facility to the default (local7), use the no form of this command.
logging facility facility-type
no logging facility
Syntax Description
Command Default local7
Command Modes Global configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines Table 2-2 describes the acceptable keywords for the facility-type argument.
facility-type Syslog facility. See the "Usage Guidelines" section of this command entry
for descriptions of acceptable keywords.
Release Modification
3.6.x This command was introduced.
Table 2-2 logging facility facility-type Argument
Facility-type keyword Description
auth Authorization system
cron Cron facility
daemon System daemon
kern Kernel
local0-local7 Reserved for locally defined messages
lpr Line printer system
mail Mail system
news USENET news
sys9 System use
sys10 System use
sys11 System use
sys12 System use
sys13 System use