Specifications

Table Of Contents
2-173
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
link port-enhanced-recovery
link port-enhanced-recovery
Enables link port enhanced recovery.
To disable link port enhanced recovery, use the no form of this command.
link port-enhanced-recovery
no port-enhanced-recovery
Syntax Description This command has no arguments or keywords.
Command Default Link port enhanced recovery is disabled.
Command Modes Interface Linecard Configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines Link port-enhanced-recovery tries to recover the link before link failure is declared. When enabled, it
tries five times to recover the link at 200msec intervals before the link is declared down
If link failure-reflection is also configured, it comes into effect after one second.
Authorization: admin
Examples The following example shows how to enable link port enhanced recovery.
SCE>enable 10
Password:<cisco>
SCE#config
SCE(config)#interface linecard 0
SCE(config if)#link
port-enhanced-recovery
SCE(config if)#
Related Commands
Release Modification
3.6.x This command was introduced.
Command Description
link failure-reflection Enables link failure reflection.