Specifications

Table Of Contents
2-171
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
link mode
link mode
Configures the link mode. The link mode allows the user to force the specified behavior on the link. This
may be useful during installation and for debugging the network.
link mode link mode
Syntax Description
Command Default None.
Command Modes Linecard Interface Configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines Use the link parameter for the SCE 2000 4xGBE and the SCE 2000 4/8xFE platforms only. Since the
SCE 1000 platform has only one link, it is not necessary to specify the link.
Use the all-links keyword to configure the link mode for all links (SCE 2000 platforms only).
The sniffing mode can be configured only for all links (use the all-links keyword).
Authorization: admin
link Use this parameter for SCE 2000 platforms only
GBE:
GBE1-GBE2
GBE3-GBE4
FE:
LINK1
LINK2
all-links
mode
Forwarding
Bypass
Cutoff
Sniffing
Release Modification
2.5.7 This command was introduced.