Specifications

2-162
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
ip-tunnel IPinIP skip
ip-tunnel IPinIP skip
Enables the recognition of IPinIP tunnels and skipping into the internal IP packet. Use the no form of
this command to disable IPinIP skip.
ip-tunnel IPinIP skip
no ip-tunnel IPinIP skip
Syntax Description This command has no arguments or keywords.
Command Default By default, IPinIP skip is disabled.
Command Modes Interface Linecard Configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines
• IPinIP and other tunnels: IPinIP is supported simultaneously with plain IP traffic and any other
tunneling protocol supported by the SCE platform.
• Overlapping IP addresses: There is no support for overlapping IP addresses within different IPinIP
tunnels.
• IPinIP can only be enabled or disabled when there is no application loaded or the linecard is shut
down.
• DSCP marking: For IPinIP traffic, DSCP marking can be done on either the external or the internal
IP header exclusively.
See the ip-tunnel IPinIP DSCP-marking-skip command.
Authorization: admin
Release Modification
3.1.6 This command was introduced.