Specifications

2-134
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
ip domain-lookup
ip domain-lookup
Enables or disables the domain name lookups. Use the no form of the command to disable the domain
name lookup.
ip domain-lookup
no ip domain-lookup
Syntax Description This command has no arguments or keywords.
Command Default By default, domain name lookup is enabled.
Command Modes Global configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines Authorization: admin
Examples The following examples illustrate how to use this command.
EXAMPLE 1:
The following example enables the domain lookup.
SCE>enable 10
Password:<cisco>
SCE#config
SCE(config)#ip domain-lookup SCE(config)#
EXAMPLE 2:
The following example disables the domain lookup
SCE>enable 10
Password:<cisco>
SCE#config
SCE(config)#no ip domain-lookup 
SCE(config)#
Release Modification
2.5.7 This command was introduced.