Specifications

2-124
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
interface mng
interface mng
Enters Management Interface Configuration mode.
interface mng slot-number/interface-number
Syntax Description
Command Default This command has no default settings.
Command Modes Management Interface Configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines Use this command to configure the management ports for the SCE platforms.
The system prompt is changed to reflect the Management Interface Interface Configuration mode.
• To return to the Global Configuration Mode, use the exit command.
• To return to the Use Exec authorization level, use the end command.
Authorization: admin
Examples The following example enters into Management Interface Configure Interface Mode.
SCE>enable 10
Password:<cisco>
SCE#config
SCE(config)#interface mng 0/1

SCE(config if)#
slot-number The number of the identified slot. Enter a value of 0.
interface-number The Management interface number. Enter a value of 1 or 2 to configure the
desired Management port.
Release Modification
3.0.0 This command was introduced.