Specifications

2-123
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
interface linecard
interface linecard
Enters Linecard Interface Configuration Mode.
interface linecard slot-number
Syntax Description
Command Default This command has no default settings.
Command Modes Global configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines The system prompt is changed to reflect the Line Card Configuration mode.
• To return to the Global Configuration Mode, use the exit command.
• To return to the Use Exec authorization level, use the end command.
Authorization: admin
Examples The following example enters LineCard Interface Configuration Mode.
SCE>enable 10
Password:<cisco>
SCE#config
SCE(config)#interface linecard 0

SCE(config if)#
Related Commands
slot-number The number of the identified slot. Enter a value of 0.
Release Modification
2.5.7 This command was introduced.
Command Description
exit Exits from the current mode to the next "lower" mode.
end Exits from the global configuration mode or interface configuration mode
to the User Exec authorization level.