Specifications

2-115
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
force failure-condition (SCE 2000 only)
force failure-condition (SCE 2000 only)
Forces a virtual failure condition, and exits from the failure condition, when performing an application
upgrade.
force failure-condition
no force failure-condition
Syntax Description This command has no arguments or keywords.
Command Default This command has no default settings.
Command Modes Linecard Interface Configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines When upgrading the application in a cascaded system, use this command to force failure in the active
SCE 2000 platform (see 'System Upgrades in the Cisco SCE 2000 and SCE 1000 Software Configuration
Guide).
Authorization: admin
Examples The following example forces a virtual failure condition.
At the displayed 'n', type 'Y' and press Enter to confirm the forced failure.
SCE>enable 10
Password:<cisco>
SCE#config
SCE(config)#interface linecard 0
SCE(config if)#force failure-condition 
Forcing failure will cause a failover - do you want to continue? n
SCE(config if)#
Related Commands
Release Modification
2.5.7 This command was introduced.
Command Description
pqi upgrade file Upgrades the application using the specified pqi file and the upgrade
options specified (if any).