Specifications

Table Of Contents
1
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
About this Guide
Revised: February 20, 2014, OL-26797-03
Introduction
This guide contains Command-Line Interface (CLI) commands to maintain the SCE platform. This guide
assumes a basic familiarity with telecommunications equipment and installation procedures.
This reference provides a complete listing of all commands at the admin authorization level or below,
with examples of how to use each command to perform typical SCE platform management functions.
Note This guide applies only to the Cisco SCE 2000 and the Cisco SCE1000 platforms. For information
concerning CLI commands for the Cisco SCE8000 platform, refer to the Cisco SCE8000 CLI Command
Reference.
Audience
This guide is intended for the networking or computer technician responsible for configuring and
maintaining the SCE platform on-site. It is also intended for the operator who manages the SCE
platform(s). This guide does not cover high-level technical support procedures available to Root
administrators and Cisco technical support personnel.