Specifications

2-104
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
end
end
Exits from the global configuration mode or interface configuration mode to the User Exec authorization
level.
end
Syntax Description This command has no arguments or keywords.
Command Default This command has no default settings.
Command Modes Linecard Interface Configuration
Global configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines Use this command to exit to the User Exec authorization level in one command, rather than having to
execute the exit command twice. The system prompt changes to reflect the lower-level mode.
Authorization: admin
Examples The following example illustrates how to use this command.
SCE>enable 10
Password:<cisco>
SCE#config
SCE(config)#interface linecard 0
SCE(config if)#end
SCE#
Release Modification
3.5.5 This command was introduced.