Specifications

2-101
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
enable
Usage Guidelines Authorization levels are illustrated in Figure 2-2.
Figure 2-2 Enable Command
If a level is not specified, the level defaults to admin authorization, level 10.
Note that you cannot use the enable command from the Privileged Exec or any of the configuration
command modes.
Authorization: User
Examples The following example accesses the administrator authorization level. Note that the prompt changes
from SCE> to SCE#, indicating that the level is the administrator privilege level.
SCE>enable
Password:<cisco>
SCE#
Related Commands
User Authorization Level (0)
User Exec Mode
Enable
Enable
Enable
Enable
Viewer Authorization Level (5)
User Exec Mode
Admin Authorization Level (10)
Privileged Exec Mode
Root Authorization Level (15)
Privileged Exec Mode
157244
Command Description
disable Moves the user from a higher level of authorization to a lower user level.
enable password Configures a password for the specified authorization level, thus preventing
unauthorized users from accessing the SCE platform.