Specifications

2-72
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
connection-mode (SCE 2000 platform)
Command History This table includes the following release-specific history entries:
Usage Guidelines
Caution This command can only be used if the line card is in either no-application or shutdown mode.
Authorization: admin
Examples The following example shows how to configure the primary SCE platform in a two-SCE platform inline
topology. This device is designated as SCE platform‘0’, and the behavior of the SCE platform if a failure
occurs is bypass (default).
SCE>enable 10
Password: <cisco>
SCE#config
SCE(config)#interface linecard 0
SCE(config if)#connection-mode inline-cascade sce-id 0 priority primary on-failure bypass

SCE(config if)#
Related Commands
Release Modification
2.5.7 This command was introduced.
Command Description
show interface linecard connection-mode Shows the current configuration
of the SCE platform traffic link
connection.
show interface linecard cascade redundancy-status Displays the current
redundancy-status of the SCE
platform.
show interface linecard cascade connection-status Displays information regarding
the connection between two
cascaded SCE 2000 platform.
show interface linecard cascade peer-sce-information Displays information about the
peer SCE platform.