Specifications

2-70
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
connection-mode (SCE 1000 platform)
connection-mode (SCE 1000 platform)
Sets the connection mode parameters for an SCE 1000 platform.
connection-mode connection-mode on-failure on-failure
Syntax Description
Command Default connection mode = inline
Command Modes Linecard Interface Configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines This command can only be used if the line card is in either no-application or shutdown mode.
Authorization: admin
Examples The following example sets the connection-mode to inline and the on-failure mode to cutoff.
SCE1000>enable 10
Password:<cisco>
SCE#config
SCE1000(config)#interface linecard 0
SCE1000(config if)#connection-mode inline on-failure cutoff

SCE1000(config if)#
Related Commands
connection-mode inline or receive-only setting.
• inline SCE platform is connected in a bump-in-the-wire topology.
• receive-only SCE platform is connected in an out-of-line topology
using a splitter or switch.
On-failure determines system behavior on failure of the SCE platform. (inline
topologies only)
• bypass
• cutoff
Release Modification
2.5.7 This command was introduced.
Command Description
show interface linecard connection-mode Shows the current configuration of the SCE
platform traffic link connection.