Specifications

2-69
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
configure
configure
Enables the user to move from Privileged Exec Mode to Configuration Mode.
configure
Syntax Description This command has no arguments or keywords.
Command Default This command has no default settings.
Command Modes Privileged EXEC
Command History This table includes the following release-specific history entries:
Usage Guidelines After the user enters the configure command, the system prompt changes from <host-name># to
<host-name>(config)#, indicating that the system is in Global Configuration Mode.
• To leave Global Configuration Mode and return to the Privileged Exec Mode, use the exit command.
• To leave Global Configuration Mode and return to the Use Exec authorization level, use the end
command.
Authorization: admin
Examples The following example enters the Global Configuration Mode.
SCE>enable 10
Password:<cisco>
SCE#configure 
SCE#(config) #
Related Commands
Release Modification
2.5.7 This command was introduced.
Command Description
exit Exits from the current mode to the next "lower" mode.