Specifications

2-64
Cisco SCE 2000 and SCE 1000 CLI Command Reference
OL-26797-03
Chapter 2 CLI Command Reference
clock summertime
clock summertime
Configures the SCE platform to automatically switch to daylight savings time on a specified date, and
also to switch back to standard time. In addition, the time zone code can be configured to vary with
daylight savings time if required. (For instance, in the eastern United States, standard time is designated
EST, and daylight savings time is designated EDT). Use the no form of this command to cancel the
daylight savings time transitions configuration.
clock summertime
Syntax Description
Command Default recurring, offset = 60 minutes
By default, the following recurrent time changes are configured:
• Daylight savings time begins: 2:00 (AM) on the second Sunday of March.
• Daylight savings time ends: 2:00 (AM) on the first Sunday of November.
Command Modes Global configuration
zone The code for the time zone for daylight savings.
week1/week2 The week of the month on which daylight savings begins (week1) and ends
(week2). A day of the week, such as Monday, must also be specified. The
week/day of the week is defined for a recurring configuration only.
Default: Not used
day1/day2 The day of the week on which daylight savings begins (day1) and ends
(day2).
For recurrent configuration: day is a day of the week, such as Sunday.
Use the keywords first/last to specify the occurrence of a day of the week
in a specified month. For example: last Sunday March.
For non-recurrent configuration: day is a day in the month, such as 28.
Default: day1 = second Sunday, day2 = first Sunday
month1/month2 The month in which daylight savings begins (month1) and ends (ends2).
Default: month1 = March, month2 = November
year1/year2 The year in which daylight savings begins (month1) and ends (ends2).
For non -recurring configuration only.
Default = not used
time1/time2 The time of day (24-hour clock) at which daylight savings begins (time1)
and ends (time2).
Required for all configurations. Default: time1/time2 = 2:00
offset The difference in minutes between standard time and daylight savings time.
Default = 60