Technical information

49
To view the running configuration, complete the following steps:
Step 1 At the SCE 1000# prompt, type show running-config.
The system shows the running configuration.
SCE 1000#show running-config
#This is a general configuration file (running-config).
#Created on 15:50:56 CET MON February 11 2002
#cli-type 1
#version 1
clock timezone CET 1
snmp-server community “public” ro
snmp-server host 10.1.1.253 traps version 1 “public”
interface LineCard 0
connection-mode active
no silent
no shutdown
flow-aging default-timeout UDP 60
interface FastEthernet 0/0
ip address 10.1.5.109 255.255.0.0
interface FastEthernet 0/1
interface FastEthernet 0/2
exit
line vty 0 4
no timeout
exit
SCE 1000#
One of the useful show commands is the show version command. This command displays global static information
on the SCE 1000 as software and hardware version, image build time, system uptime, last open packages names and
information on the SLI application assigned.