User guide

Chapter 4 Installation and Startup
Pre-Installation Requirements
SCE 1000 2xGBE Release 2.0.10 User Guide
OL-7117-02 4-5
Fans
The fan module provides cooling for the internal components. The fan drawer is a field-
replaceable unit containing five fans, and is installed at the right rear of the SCE 1000.
Figure 4-3: SE2000 Fan Module
When you install the SCE 1000, ensure adequate airflow for the inlet and exhaust vents.
Note
Remember to leave a two inch (5 cm) clearance on both sides of the SCE 1000 and five inches (12.7
cm) at the rear for adequate airflow for the inlet and exhaust vents.
Site Requirements
The following tables contain the site requirement specifications for the SCE 1000.
Table 4-2 SCE 1000 AC Power supply
Power Specification
AC power input 100 to 240 VAC
AC power frequency 47 to 63 Hz
Power consumption up to 200W